Use the stock you have well
The cut list groups lengths by spec and stock size, then shows the expected yield and drops so the shop can make a sensible cut order.
Prepare the cut list
Make more of the stock you have
Turn the lengths from your reviewed isometrics into a cut list by spec and stock length, then send it to the shop.
Available in personal and company projects.
- Group cuts by material, size, and stock length
- Keep the leftover length with its spool and drawing
- See how much of each stock length will be used
- Download an Excel list for the saw operator
From drawing to saw
Use the reviewed lengths from the drawing alongside the BOM and weld log, then export the list to Excel for the saw operator or shop view.
What you get
See how much stock is used
Compare useful cut length with the stock consumed and see where offcuts are increasing.
Drop tracking
Track leftover length by material so the shop can see where stock is being lost.
Per-spool detail
Open a spool to see which cuts came from each length of stock.
Frequently asked questions
Where do the cut lengths come from?
The scanner reads cut lengths from supported isometrics. You can check and change any length before the cut plan is prepared.
Can I set my own stock lengths?
Yes. Stock lengths and material specs are configured per project so the optimizer matches what your supplier actually delivers.
How is stock yield calculated?
Stock yield is the ratio of useful cut length to total stock consumed, after the optimizer assigns cuts to lengths. Drops below a configurable threshold are counted as scrap.